| | | |  | INCRA
TS-LS Shown Here with Table Saw and
Two Optional Router Table Extension Wings
Part
Number: LS32-TS
| The
NEW INCRA TS-LS offers the one thing that every table saw fence should have, but
none of them do, namely, Automatic Positioning Control. All other table saws depend
on a tape measure and your eyesight to position your work. That's why all table
saw users are resigned to the fact that a good cut requires long set-up times
and endless trial and error. The INCRA TS-LS completely eliminates the need for
these tedious processes by using INCRA'S patented lead screw technology to position
your work instantly and automatically to within 0.002".
Even better,
if you want to repeat a cut, you can return to any former position in less than
5 seconds with ZERO repeatability error. This kind of accuracy and perfect repeatability
are luxuries that woodworkers could only dream about before the INCRA TS-LS. And
because of its structural design, centrally placed carriage, and optimized side
mounted clamping system, the entire unit virtually welds itself together into
one solid block of steel and aluminum when locked in place. The result is exceptional
strength, rigidity and stability. | | True
machine shop accuracy ...
Perfect repeatability ...
Exceptional strength. | | Will
the INCRA TS-LS fit on my table saw?
The INCRA TS-LS will fit directly
on just about
any standard 10" table saw without any drilling, tapping
or modifications. There are only two
things you need to check to make sure
that it
will fit on your saw: | 1.
Length of miter gauge slot (front to back distance of table) If this measurement
is between 27" and 28" (standard for most 10" table saws),
the
INCRA TS-LS will fit on your saw. If this measurement is less than 27"
or
more than 28", let us know and we will quickly send you customized
base
support bars for a very nominal charge. | 2.
Holes in front and back edges of table surface If your table saw has at least
two holes on the front edge and two holes on the back
edge of the table,
then the INCRA TS-LS will install
directly on your table. Hole locations and diameter are
completely unimportant because INCRA's universal rail
mounting
brackets will work with any hole pattern. |
| | TS-LS
Specifications: | 
Positioning range - right of blade: 32" | |
Positioning range - left of blade: 16" | |
Positioning accuracy: .002" over full range |
Repeatability: Return to any former position in less than 5 seconds with
ZERO
repeatability error | |
Fence length: 36" |
| | | | LS32
Specifications: |
Incra's Patented Steel Lead Screw with Quick Action Cam Clamp and
Micro
Adjust Wheel with Rotating Bezel | |
Heavy duty 72" rail system | |
Mounting brackets | |
36" Heavy duty rip fence with T-slots on front and top | |
Engraved 32" Stainless Steel Magnetic Scale | |
Incra LS Positioner 32" Range Carriage and Tubular Base |
INCRA'S Patented Steel Lead Screw with Micro Adjust Wheel with Rotating
Bezel
and Quick Action Cam Clamp | |
Incremental Positioning in 1/32" Steps | |
Continuous Micro-Positioning with Audible Dentent Every 1/1000" | |
Solid Steel and Aircraft Grade Aluminum Construction Throughout | |
Hairline Cursor and "Big View" Optical Window | |
Hardware packs and fully illustrated easy instruction manuals | | | |  |
Package
#1 - Pair of 72" Rails | | Package
#2 - Base Mount Unit | | Package
#3 - LS32 Positioner | | |
|
| | |
| | | Five
Sliding Scale
Template Channels
Two of the channels are used for primary
(distance from the cutter) and floating (distance from the last cut) reference
scales. The 32" stainless steel scale fits in another channel leaving two
more for your choosing. These scales combined with Incra's patented positioning
racks allow you to return to any former position in less than 5 seconds with ZERO
repeatability error. After setup, you also get perfect measured cuts just as fast.
| | Easy
On, Easy Off Dismounts for cross-cutting operations and remounts in less than
10 seconds. This also makes it easy to use INCRA precision on both sides of the
blade. The positioning range is 32" to the right and 16" to the left
of the blade. The new TS-LS removes exactly the same way as the TS Ultra shown
here.
| | These
"saddle" brackets not only allow fast dismounts, the clever design of
INCRA's centrally placed carriage literally forces the fence into perfectly parallel
alignment at any position. These brackets also rise above the table saw surface
to allow movement almost anywhere along the 72" rails in either direction.
| | The
fence skims above the table on whisper smooth glides, eliminating all fence to
table contact.
|  | Quick,
Easy Installation
Universal mounting brackets virtually guarantee compatibility
with any 10" table saw, with no drilling,
no tapping and no modifications.
|  | 82-Minute
Instructional DVD
Setup and operation of woodworking's most accurate
fence system, plus learn the easy way to cut all of your favorite joint types. | | |  |
"...
I
installed their
router table option on
the
left side of my
table-saw so I can
slide
over the entire
LS fence system for
router
table use as
well – slick! Works
great
for that as well.”
-
from Lumberjocks.com | | "Offers
the most precise
and repeatable cuts of
any
fence system
available."
-
from Popular Woodworking Magazine | | "Excellent
accuracy for
cuts up to 32” wide.”
NOTE:
52” range model
also available (INCRA
part
#LS52-TS)
- from Wood Magazine | | "Earned
A grades for
both lack of deflection
and
locking parallel to
the blade - the INCRA
LS32-TS."
-
from Wood Magazine | | "INCRA’s
microadjuster
moves the fence in
precise
.001”
increments for
repeatable accuracy."
-
from Wood Magazine | | |
|
