|
 |  | | Miter
3000 Part
Number: MITER3000/27F | The
Miter 3000 is the most-feature rich miter gauge on the planet with the single
exception of the Miter 3000SE. The Incra exclusive AngleLOCK Indexing System delivers
364 lock solid angle stops in 5°,1° and 1/2° increments over a full
180° range with continuous adjustability between all 1/2° settings. Combine
this with the included GlideLOCK Miter Bar, Incra Flip Fence and the Incra Flip
Shop Stop, and you'll easily achieve mitering accuracy that you never thought
possible. The Miter3000 by Incra delivers perfect, repeatable accuracy.
First
time, Every time, Any angle.
| 
| |  | 
GlideLOCK Miter Bar
Six expansion disks adjust both
sides of the bar for ZERO side play, anti-friction travel on
all table saws with standard 3/4" x 3/8" or near-standard
miter gauge channels, including Delta, Craftsman, imports, etc.
This means that all of INCRA's incredible precision will actually
show up in your work because the bar CAN'T wiggle around in
the miter slot. | |
| | | | |  | | |
The INCRA Fip Fence is shown here with the
Incra FlipShopStop.
In this photo the FlipShopStop has both arms down and one of
the three included steel rods | |
| | | | |  | | |
AngleLOCK Indexing
Precision angle indexing teeth are
laser cut in solid steel to lock in 364 positive angle stops
in 1/2°, 1° or 5° increments over a full 180°
range. it's also continuously adjustable between
1/2° steps. | |
|
| | |
INCRA
Miter 3000 & Miter 5000
| | | My
first impression of this accessory even before it was assembled is something akin
to "I wish the rest of my saw were made with this attention to detail, quality,
and precision". Part of the normal process of assembling and tuning woodworking
machines and most accessories for me involves quite a bit of deburring of edges,
lubrication, chasing tapped holes and whatnot. The Incra is a noticeable step
above all this as I basically didn't have to do any of these things." -
BenchMark.com | | |
|  |
| | | Incra
FlipShopStop shown with both arms down and one of the included steel rods.
| | FlipShopStop
one arm up, one down. Shown with included short steel rods.
|  | FlipShopStop
both arms up.
|  | Interlocking
grooves in the fence and stop ensure even the sharp edge of mitered work will
not push behind the stop. Accuracy is guaranteed.
|  | |
Replacement Flip Fence
(27"-49" & 36" to 64")
Telescoping
Flip Fence
with 27” to 49 inch length and 36 to 64 inch length. |
|
Download INCRA's 
