INCRA Miter 5000

incra miter gauges > miter 5000

INCRA Miter 5000

miter 5000

Part Number: MITER5000

The Miter 5000 blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw.

A Renewable Right Panel provides zero-clearance tear-out control and cut-off support on Both sides of the blade. Two aluminum T-tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36" to 64" telescoping IncraLOCK Cut-off Fence. Will crosscut a 25" wide board with full control on a standard 10" table saw. The Miter5000 by INCRA delivers perfect, repeatable accuracy. 

First time • Every time • Any angle

INCRA Hold Down Clamp. Included with every Miter 5000 is this simple and incredibly useful Hold Down Clamp which locks your workpiece onto the sled for maximum accuracy and the cleanest cuts possible. It only takes seconds to use and provides the rigidity needed for world class results.

GlideLOCK Miter Bar

GlideLOCK Miter Bar
The expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard 3/4" x 3/8" or near-standard miter gauge channels, including Delta, Craftsman, imports, etc. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.760".

Telescoping IncraLOCK Fence

Special Edition Telescoping INCRA-LOCK Fence
This Special Edition Miter Fence telescopes from 36" to a full 64" length. Includes the Dual Flip Shop Stop and INCRA's patented Automatic Positioning Control.

AngleLOCK Indexing

AngleLOCK Indexing
Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2°, 1° or 5° increments over a full 180° range. it's also continuously adjustable between 1/2° steps. 

INCRA Miter 5000 Features:

► 364 Positive Stop in 1/2° Increments

► Extender Fence Telescopes from 36" to 64"

► GlideLOCK Miter Bar Adjusts to Fit Any Standard Table Saw

► INCRA Flip Shop Stop Positioner

► Indexing Every 1/2° Plus Continuous Adjustment Between

► Right- and Left-tilt saw compatible

► Fence lock down clamp for rock solid support

► Miter Slider included for static sled panel positioning

INCRA Miter 5000 Sled for Shopsmith:

Miter 5000 Sled for Shopsmith
INCRA Miter 5000 Sled for Shopsmith
Part Number: SMITER5000
> more info
In cooperation with Shopsmith engineers, this version of the Miter 5000 Sled has been specifically adapted to the Shopsmith Mark V Series. This is the only Shopsmith authorized miter sled on the market.

Miter 5000 Sled Replacement Panel In Use
The Miter 5000 Sled is customized exactly for your own saw by installing the entire sled and then making a single cut through the right panel to give you a "zero clearance" sled edge for excellent workpiece support. This newly separated sled panel is then locked in place using the included miter channel locking devices (Incra Miter Sliders). Easily removed and reattached this panel is permanently used unless you change saws. Obviously any "zero clearance" cut will be in the wrong place should you change table saws and having a replacement panel available keeps maintains the remarkable value of your Miter 5000.

To replace your panel, you simply remove the secondary panel at the T-Slot extrusion and then attach your replacement panel. Once again you make a "zero clearance" cut of the new panel and attach the resulting piece as before. Below you can see the same exact setup with a lefttilt Shopsmith saw.


detail focus

Flip Shop Stop shown with both arms down

INCRA Flip Shop Stop shown with both arms down and one of the included steel rods.

Flip Shop Stop one arm up, one down

Flip Shop Stop one arm up, one down. Shown with included short steel rods.

Flip Shop Stop both arms up

Flip Shop Stop both arms up!

Interlocking grooves

Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. Accuracy is guaranteed.

Fence Locking Bracket

Fence Locking Bracket Creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment.



Click to download INCRA Miter 5000 Manual in PDF format.


Click to download INCRA Miter Gauge Brochure in PDF format.


Click to see Miter Gauge Comparison Chart.

video demos


Click to download Complete INCRA Miter Gauge in Windows Media format (31.7MB, PLEASE BE PATIENT - this may take several minutes to load.)


Replacement Right Sled PanelReplacement Right Sled Panel Get zero clearance for an additional angle cuts or just use as a replacement.